|
اللغة الحالية
    تغيير اللغة
    بيتمنتجاتعامل رغويعامل رغوي

    عامل رغوي

    About our foaming agent, its advantages can be shown as:

    1. Heat stability
    2. Fine and uniform cells
    3. Uniform distribution
    4. Well dispersed
    5. Compatible with other materials
    6. Easier to control the decomposition
    7. Good Stability in mass production
    Inquire Now
    واتساب
    Share:

    Description

    عامل رغوي

    ‧The residue of our company’s foaming agent after decomposition is pure and free of impurities
    ‧The residues of foaming agents from other companies have obvious impurities and impure colors after decomposition
    ‧High-quality foaming agents and one-stop technical services ensure that panel production is free from slag falling, features fine cells, and has no burrs.
    ‧ One-stop service for the production of various panels and profiles 
    ‧ High-quality base color supports pure and bright final color

    resinprocessing technologyProduct NameDecomposition temperature (℃)Gas generation rate (ml/g)typical characteristics
    PVCextrusionWhite  foaming agent B211155℃150High cost-effectiveness, poor whiteness
    PVCextrusionWhite  foaming agent B511155℃153High gas generation, good whiteness
    PVCextrusionWhite  foaming agent B501155℃153High gas generation
    PVCextrusionWhite  foaming agent B506155℃150No ammonia, good whiteness
    PVCextrusionWhite  foaming agent C80160℃155High gas generation, excellent whiteness, and suitable for high-end board 
    PVCextrusionWhite  foaming agent B5160℃155High gas generation, excellent whiteness
    PVC/PSextrusionYellow foaming agent AC328160℃175Economic yellow foaming agent
    PVCextrusionYellow foaming agent AC330160℃180Widely applicable to carbon crystal boards, high cost-effectiveness, and ensuring sufficient gas generation without precipitation
    PSextrusionYellow foaming agent AC3A145℃175Fine and uniform cells, well dispersed
    PVCextrusionYellow foaming agent WF323170℃185Large gas generation, moderate price, suitable for boards and profiles with a density of 0.4 or higher.
    PVC/EVCInjection molding/doctor bladingYellow foaming agent SA180170℃200Nanoscale micro-fine, specifically designed for shoe materials, anti-shrinkage. Cooperating with our company’s specialized regulator TS-209, especially for thick-soled shoe materials, with stronger three-dimensional flexibility, better fluidity, and a fine and nonporous cross-section.
    PVCextrusionYellow foaming agent AC-800F175℃200Suitable for plates and profiles with a density between 0.3 and 0.5, high gas generation, and uniform distribution.
    PVCInjection molding/doctor bladingMicrosphere foaming agent140-170℃The diameter of the heated sphere can be increased from 12 µ m to 40 µ mAverage particle size: 26-35 µm; the microsphere volume can be increased by several tens of times. Suitable for PVC blowing foaming, foaming、PVC injection molding foaming processes (such as lamban shoes), ultra-light clay, water-based ink printing, etc.
    PVC paste resindoctor bladingYellow foaming agent 180G170℃180Good delicate cells, no risk of discoloration, and suitable for PVC wallpaper.
    PVC/PS/EVA/XPEExtrusion, molding, injection molding, doctor bladingYellow foaming agent AC-808205℃230Original powder, with a larger gas generation capacity, accepting customized products of various particle sizes.
    rubberextrusionH foaming agent205℃270-290English abbreviation: DPT；large pore size、high gas generation 
    Rubber/EVA/PE/PVC/PVC+NBR blendextrusionLow temperature foaming agent130-135℃145-150Low decomposition temperature、 stable foaming ratio, good whiteness, and sufficient elasticity of the product. Widely used for foaming EVA, PE, PVC, natural rubber, synthetic rubber, PVC+NBR blends, etc., especially suitable for large mold hot pressing foaming and small mold hot pressing foaming of EVA MD.
    GPPS/PP/ABS/PCextrusionWhite masterbatch PS90210℃40Endow the product with more stable haze, light transmittance, and uniformity, with fine pores of 200-250 µm. Particularly suitable for foaming GPPS optical diffusion plates.

    Application scenarios

    AC 328

    PVC Thin profiles  PS profiles

    AC 330

    PVC board with density of 0.6+

    WF 323

    PVC board with density of 0.4+

    AC-800F

    PVC board with density of 0.3-0.5

    AC 180G

    PVC wallpaper

    Low temperature foaming agent

    For Rubber/EVA/PE/PVC/PVC+NBR blend extrusion

    B 211

    Carbon crystal board

    B 511

    Bathroom Panel

    B 501

    Door Core Panel

    B 506

    Decorating board Soft & Hard Wrapped Panel

    B 5

    Advertising board, high-grade bathroom board, cabinet board

    101D

     

    101C

    		  

    Trial run of white foaming agent advertising boards at a major manufacturer: seamless batch-to-batch transition with no defective boards. The main machine current increased by 5A, the feeding rate dropped from 18.9 to 18.6, and the traction speed rose from 530 to 545. The board surface is shiny with fine cell structure, and each board is 200 g lighter. The customer’s long-standing issue of the middle white line disappeared significantly, prompting the customer to place an order immediately

    Tags:

  • used Foaming Agent 4
    • واتساب

    ترك رسالة!

    ترك رسالة!